7. Command password protection
Command: 123456lock
After send this command, then it will require a password in front of all commands (except reboot and RESET!). For example 123456LOC, 123456A1 etc.
(default password is 123456)
Remove password protection, just simply send 123456unlock
8. Change password:
Command: Old password + H + new password
Example: 123456H666666
The password now is changed to 666666
※ The pre-set password won’t be erased by changing a new sim card.
※ Be sure keep the new password in mind, otherwise you have to ask your distributor to restore the original setting in case of losing the new password.
※ Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
9. GEO-Fence alarm
Command: G+X, Y, Z, xxxM/KM
Example: G1,1,1,100M
Notes: No spaces in between.
X=No. of Geo fence (1~3), user can set 3 Geo fences
Y=0 means to turn off the function
Y=1 means to turn on the function
Z=1 means to set alarm when the tracker enters the preset area
To Next Page
Loading...