www.evofitness.net.au
10
WINDOW DISPLAY:
1. “INCL/PULSE” window: This will display the user’s incline level and user’s pulse; the incline range is
from 0 to 15%. The default setting will start at 0%. When the user places both hands over the palm
pulse, it can track and display the user’s pulse after 5 seconds, the LED screen will indicate the pulse
function. The pulse range will be from 50-200 b/pm.
2. “TIME/ DIST/CAL”: ”TIME’’ window will alternate every five seconds; this is indicated via the LED. The
time is measured in minutes and seconds. During a Pre Set program the window will show a count
down phase, in the default manual setting the time will count on. “DIST’” window is measured in
kilometers. The default setting will start at 1km/h. ‘’CAL’’, in the default manual setting and also during
the Pre Set programs you will have a calorie count available. This will automatically count upward for
the duration of use.
3. “SPEED” window: Displays speed, shows range: 1-18 KM/h.
BUTTON FUNCTION:
1. “PROGRAM” Button: When the treadmill is not running, press SELECT button and set up the exercise
time and program from “0:00”, “ P1->P16, U1->U2”. Manual mode is the default program, the default
speed in kilometres is 1KM/H. (0:00 is manual mode, pre-set program: P1-P16, U1-U2 is the user’s
programs).
2. “MODE” Button: Press this button to choose modes: “0:00” “15:00” “1.0” “50” (“0:00” is manual model,
“15:00” is the time count down, “1.0” is distance count down and “50” is calorie count down); when you
choose every mode, you can press the speed button and incline button to set count, after that, press
the START button to start the treadmill.
3. “START” button: Be sure you have the safety key attached to magnetic connection before
commencing a manual/pre set program.
To Next Page
Loading...
