4
READ FIRST
IMPORTANT PRODUCT AND SAFETY INFORMATION
CAUTION CAREFULLY FOLLOW ALL INSTALLATION INSTRUCTIONS. IF UNIT IS
INSTALLED TO A COUNTER SURFACE, CONSTRUCT ALL COUNTER
SPACE, STANDS, OR OTHER SURFACES TO THE RECOMMENDED
INSTALLATION SPECIFICATIONS AS OUTLINED IN THIS MANUAL.
CAUTION THIS UNIT IS HEAVY AND SHOULD BE MOVED BY TWO PEOPLE.
CAUTION ALWAYS KEEP ANY AND ALL FLAMMABLE LIQUIDS AND
COMBUSTIBLE MATERIALS AWAY FROM UNIT. DO NOT STORE
TOWELS OR UTENSILS, OR ANY OTHER ITEMS ON THIS APPLIANCE.
CAUTION DO NOT CLEAN THE COOKING SURFACE WITH PUMICE STONE OR
CLEANING SOLUTIONS. USE ONLY GRILL PADS / SCREENS AND FOLLOW
THE PRESCRIBED METHOD OF CLEANING AS OUTLINED IN THIS MANUAL.
NOTICE THE SERIAL NUMBER AND MODEL INFORMATION LABEL PLATE IS
LOCATED ON THE UNDERNEATH OF THE UNIT.
NOTICE INSTALLATION OF ANY VENT HOODS OR FIRE EXTINGUISHER SYSTEMS
MUST CONFORM TO THE NATIONAL, STATE, AND LOCAL BUILDING AND
ALL APPLICABLE UNIFORM CONSTRUCTION CODES.
NOTICE DURING THE FIRST FEW HOURS OF OPERATION, IT IS NORMAL FOR OILS
AND INSULATING MATERIAL USED IN THE MANUFACTURING PROCESS TO
BECOME WARM AND GIVE OFF AN ODOR.
WARNING THIS UNIT IS EQUIPPED WITH A THREE-WIRE NEMA 5-20P CORDED
PLUG. THIS UNIT SHOULD BE FUSED SEPARATELY WITH A 20AMP
CIRCUIT. FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
WARNING KEEP WATER AND ALL COOKING SPILL OVERS AWAY FROM FRONT
CONTROL PANEL AND UNDERSIDE OF UNIT. NEVER IMMERSE OR
HOSE UNIT, OR PRESSURE SPRAY UNIT WITH LIQUID SOLUTIONS.
WARNING IF THIS UNIT IS TO BE INSTALLED TO A COUNTER SURFACE -
INSTALLATION MUST BE DONE BY A QUALIFIED ELECTRICIAN.
INCORRECT INSTALLATION CAN CAUSE INJURY TO PERSONNEL
AND/OR DAMAGE TO EQUIPMENT. THIS UNIT MUST BE INSTALLED
IN ACCORDANCE WITH ALL LOCAL AND UNIFORM BUILDING AND
CONSTRUCTION CODES, OR IN THE ABSENCE OF CODES, WITH THE
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70-LATEST EDITION
To Next Page
Loading...
