HARDWARE
If using one or two EVO SP8’s with an EVO 16, Smartgain can be used on all
connected EVO devices simultaneously.
Pressing the Smartgain Button on any SP8 or EVO 16 in your setup will activate
Smartgain across all devices. You can then select up to 24 channels across the
three devices to activate Smartgain on. Press the Smartgain Button again to
enter the listening period and automatically set the gain of up to 24 channels
at once!
Using Smartgain with an Extended
EVO System
Smartgain will now return you to the ‘Select Channels’ screen with the failed
channels automatically pre-selected, simply press Smartgain to start the
process again.
For the channels that failed, double-check your microphone cables, check
if phantom power is required for that microphone, or move the microphone
closer to the sound source. Then try the Smartgain process again.
Note: there is no need to select the green channels again as they were
already successfully set.
Top tip! When using Smartgain on multiple channels, ensure that every
microphone is used during the listening period. For example, if you are
micing a drum kit, ensure the drummer plays the Toms during the listening
period or else the gains for the Toms may be set incorrectly and aect your
recording.
To Next Page
Loading...