INTRODUCING EVOLUTION AQUA’S evoUV
Congratulations on purchasing an Evolution Aqua evoUV. Our range of evoUV pond
clarifiers have been manufactured using the latest technology and design techniques.
evoUVs have been designed to clear green water which is caused by single celled
green algae, and prevent it from returning. evoUVs will work alongside many different
filtration systems but when used alongside Evolution Aqua’s pond filtration systems, the
evoUV will deliver crystal clear and healthy pond water.
Please read this instruction manual carefully from start to finish before attempting to
install your evoUV.
UNBOXING THE evoUV
On opening the box, you can see that the UV bulb and quartz sleeve are packed
separately for safe transit. Please refer to pages 7 and 8 of this manual for instructions
on how to install the bulb and quartz sleeve. Quartz Sleeve O-Rings and End Cap
Sealing Rings are packed in a small bag inside the box.
On the evo110 the stainless steel mounting brackets are located in the cardboard end
fitment, please remove these and fit to the evo110 as instructed on page 9.
Please take time to familiarise yourself with your evoUV and its components.
3
CONTENTS
evoUV Diagram and components list PAGE 4
Flow Rates PAGE 6
Installing the quartz sleeve PAGE 7
Installing the UV bulb PAGE 8
Positioning and Mounting the evoUV PAGE 9
Connection to Your Pipework PAGE 11
Connection to the Electricity Supply PAGE 15
UV Bulb Replacement PAGE 16
Replacing / Cleaning the Quartz Sleeve PAGE 17
In Built Protection PAGE 18
Trouble Shooting PAGE 19
Frequently Asked Questions PAGE 20
Guarantee PAGE 21
To Next Page
Loading...
