www.evolutionfury.com
15
NOTE: When the machine is re-positioned
the operator should ensure that none of
the rubber feet become detached from
the machine. The rubber feet can, in some
circumstances, stick to some surfaces due
to vacuum suction.
If any of the rubber feet become detached or
damaged they must be replaced.
DUST BAG
A Dust Bag (not supplied) can be fitted
to the extraction port at the rear of the
machine. (Fig. 3a & 3b)
• Pushtheadaptortubeintotheextraction
port at the rear of the machine.
• SlidetheDustBagontotheadaptortube
ensuring that the spring clip grips the tube
holding the Dust Bag securely in place.
NOTE: For operational efficiency empty
the Dust Bag when it becomes 2/3 full.
Dispose of the contents of the Dust Bag in
an environmentally responsible way. It may
be necessary to wear a dust mask when
emptying the Dust Bag
WARNING: DO NOT USE A DUST BAG
WHEN CUTTING STEEL.
Fig. 2
Fig. 3a
Fig. 3b (Dust bag, not supplied)
To Next Page
Loading...
Need help?
General
