EasyManuals Logo

Evolution hulk petrol User Manual

Evolution hulk petrol
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
www.evolutionpowertools.com
TROUBLESHOOTING HULK PETROL
PROBLEM CAUSE POSSIBLE REMEDY
Engine will
not start.
No Fuel.
Engine switched ‘Off’.
Fouled spark plug.
Engine cold.
Engine ‘flooded’ with petrol.
Air Filter clogged or
contaminated with oil.
Major Fault.
Open Fuel Tap
Fill Fuel Tank.
Switch Engine ‘On’.
Remove, clean, reset and replace plug.
Ensure choke setting is correct.
Leave for five (5) mins.
Open choke and fully open the throttle
and try again.
Remove spark plug, clean and replace.
Try again until engine fires.
Replace Air Filter.
Contact Agent or Evolution Power Tools
for further advice.
Machine
does not
vibrate.
Belt Tension Incorrect.
Air Filter Blocked.
Eccentric Unit Damaged.
Engine speed too slow.
Adjust the belt tension.
Renew the Air Filter.
Replace eccentric unit.
Increase engine speed slightly.
TROUBLE SHOOTING HULK ELECTRO
PROBLEM CAUSE POSSIBLE REMEDY
Machine
will not
start.
Supply not switched ‘On’
Fuse in Plug ‘blown’.
Safety Start Button not
depressed preventing
‘On/Off’ actuation.
Damaged or
broken power cord.
Switch on supply at the socket.
Replace fuse and check supply.
Depress Safety Start Button
and then pull Start Lever.
Have the damaged cord replaced by an
identical type fitted by a competent technician.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Evolution hulk petrol and is the answer not in the manual?

Evolution hulk petrol Specifications

General IconGeneral
BrandEvolution
Modelhulk petrol
CategoryTools
LanguageEnglish