Evolution R185SMS - MACHINE SPECIFICATIONS; CUTTING CAPACITIES; MAXIMUM CUTTING ANGLES; BLADE DIMENSIONS

MACHINE
UK/EU/AUS USA
Product Code 064-0001 064-0004
Power 18V d.c. 20V d.c.
Speed No Load 4200 min
-1
Weight (Net) 8.6kg 19Lbs
Dust Port Diameter 35mm 1-3/8”
Tool Dimensions (H x L x W) 285 x 590 x 560
11-3/16” x 23-3/16” x 22-1/32”
CUTTING CAPACITIES
Mild Steel Plate - Max Thickness 6mm 1/4”
Mild Steel Box Section - Max Wall Thickness
(50mm mild steel box section.)
3mm 1/16”
Wood – Max section 58 mm x 210mm 2-1/4” x 8-1/4”
Minimum size work-piece
(Note: Any work-piece smaller than the recommended minimum
work-piece requires additional support before cutting.)
L:125 x W:30 x D:3mm
L: 4-7/8” x W: 1-3/16”
x D: 1/8”
Capacity at 90° - Height 58mm 2-1/4”
Capacity at 90° - Cross Cut 210mm 8-1/4”
MAXIMUM CUTTING ANGLES
Mitre 50˚ - 50˚ 50˚ - 50˚
Bevel 0˚ - 45˚ 0˚ - 45˚
MITRE BEVEL
0° 45° 210mm x 40mm 8-1/4” x 1-1/2”
45° 0° 145mm x 58mm 5-3/4” x 2-1/4”
45° 45° 145mm x 40mm 5-3/4” x 1-1/2”
BLADE DIMENSIONS
Diameter 185mm 7-1/4”
Bore 20mm
25/32”
Thickness 1.7mm 1/16”
No. of Teeth 20 20
NOISE EMISSION DATA*
Sound Pressure L
P
A (No-Load) 84,5dB(A), KpA=3dB(A)
Sound Power Level L
W
A (No-Load) 97.5dB(A), KwA=3dB(A)
Uncertainty, K
pA
& K
WA
3 dB(A)
*Noise emission test according to EN 62841-1 & EN 62841-3-9.
MACHINE SPECIFICATIONS
3
www.evolutionpowertools.com
EN