Evolution R210SMS - Machine Specifications

MACHINE SPECIFICATION S
MACHINE
Motor (220-240V ~ 50 Hz) 1500W 1500W
Motor (110V ~ 50 Hz) 1500W 1500W
Speed No Load 3750 min
-1
3750 min
-1
Weight (Net) 11.2kg 11.2kg
Dust Port Diameter 36mm 36mm
Tool Dimensions (H x W x L) (0° / 0°)
(Note: Dimensions taken with saw head down.)
314 x 575 x 610mm 314 x 575 x 610mm
Cable Length 2m 3m
CUTTING CAPACITIES
Mild Steel Plate - Max Thickness 3mm 6mm
Mild Steel Box Section - Max Wall Thickness
(50mm mild steel box section.)
3mm 3mm
Wood – Max section 230 x 65mm 230 x 65mm
Minimum size work-piece
(Note: Any work-piece smaller than the recommended minimum
work-piece requires additional support before cutting.)
L:145 x W:20 x D:3mm L:145 x W:20 x D:3mm
MAXIMUM CUTTING ANGLES
Mitre 50˚ - 50˚ 50˚ - 50˚
Bevel 0˚ - 45˚ 0˚ - 45˚
MITRE BEVEL
0° 0° 230mm x 65mm 230mm x 65mm
0° 45° 230mm x 38mm 230mm x 38mm
45° 0° 150mm x 65mm 150mm x 65mm
45° 45° 150mm x 38mm 150mm x 38mm
BLADE DIMENSIONS
Diameter 210mm 210mm
Bore 25.4mm 25.4mm
Thickness 1.7mm 1.7mm
No. of Teeth 20 24
LASER
Laser Class Class 2
Laser Source Laser Diode
Laser Output Power (Max) ≤1mW
Wave Length (Nm) 650
NOISE EMISSION DATA*
Sound Pressure L
P
A (No-Load) 110V: 95.7 dB(A) / 220-240V: 96.5dB(A)
Sound Power Level L
W
A (No-Load) 110V: 108.7 dB(A) / 220-240V: 109.5dB(A)
Uncertainty, K
pA
& K
WA
K=3 dB(A)
R210SMS R210SMS+
4
www.evolutionpowertools.com