Evolveo SecuPro - Remote Sms

107
3. Click on "Sensors" and then click on "Alarm (WiFi)", th
e
i
nterface will show WiFi connected to the phone.
4.
E
nter your WiFi password.
5.
A
fter entering the WiFi password, click "next" and select
"Confirm that the indicator is blinking rapidly" in the pop-up
interface. Click on "next".
6.
C
lick on "Next". The device search will appear.
7.
O
n the security panel, click "Menu", "Settings" and "WiFi" in
turn.
8.
E
nter the default user password: 1234 and click on "Airlink
(recommended)".
9. The message "WiFi settings will be reset, please confirm" will
a
ppear on the device. After clicking "OK" the device prompts
"Setup, please wait".
10.
A
fter a successful connection, you can rename the device by
selecting the pencil symbol. Then select "Done" in the top righ
t
c
orner.
11. The device is successfully paired with your mobile phone. You
can now use your phone to remotely control your device even if
your phone is not connected to the original WiFi network.
REMOTE SMS
HOW TO SET PARAMETERS VIA SMS
To
set parameters via SMS, edit the setting text message
according to the template below and send it to the SIM number
installed in the control panel. If the settings are correct, your
mobile phone will receive a confirmation SMS.