111
SECURITY OF PREMISES
Switching on the system
The system is switched on as follows:
With a wireless remote control: Press .
Using the panel: Press the button when the home screen is
displayed.
Using an RFID tag: When disarming the system, place the RFID tag
near the RFID area.
Using the app: By pressing the "arm" button, the application
displays that the host is in the "arm" state.
Using SMS: Sending message 1234#1 ("1234" is the user
password).
SECURITY IN STAY MODE
This mode is used when you stay at home.
To activate the system in STAY mode, do the following:
With a wireless remote control: Press .
Using the panel: Press the button twice on the home screen.
Using the app: Press the "stay arm" button.
Using SMS: Sending message 1234#3 ("1234" is the user
password).
SHUTTING DOWN THE SYSTEM
To deactivate the system, silence the alarm , clear the fault display
and cancel an alarm in progress, follow the instructions below:
To Next Page
Loading...