110
In this string, "1234" is the user password, the two "@" are
command flags, "XX" is the Zone Number (from 00 to 89), and
"Stair" is the actual text.
Getting settings via remote SMS
Query on system settings
The format is *6666
*62* and the output is displayed as follows:
SYSTEM set: Panel serial number, Language, System password,
User password, GSM CSQ, WIFI RSSI
Query the other side of the system setup
The format is *6666
*90* and the output is displayed as follows:
SYSTEM set2: GPRS access point name, IP address and server port,
NTP, Time zone, Server
Inquiry about phone number settings
The format is *6666
*51* and the output is displayed as follows:
PHONE set: 1. phone number, 2. phone number, 3. phone
number, 4. phone number, 5. phone number, REDIAL COUNTER
HOW TO MAKE A CALL VIA THE PANEL
You can use the numeric keypad on the home screen to make
calls.
Press to see a list of dialed numbers and press to redial them.
The call is cancelled if the GSM network is not registered, the
system is under alarm or in voice alarm.
To Next Page
Loading...