112
With a wireless remote control: Press .
Using the panel: Press the button when the home screen is
displayed.
Using an RFID tag: Insert the RFID tag near the RFID area when
the system is on.
Using the app: Press the "disarm" button.
Using remote SMS: Sending message 1234#2 ("1234" is the user
password).
SOS
To manually activate the SOS function, do the following:
With a wireless remote control: Press the SOS key.
Using the panel: Press the SOS button on the panel.
Using the app: Press "panic" or "SOS" and the system will sound
the alarm.
"Panic Alarm" will be displayed on the home screen. A panic alarm
will be generated. The panic alarm sends a text notification to
your mobile phone and sounds a loud alarm on your dashboard.
TWO-WAY VOICE TRANSMISSION FUNCTION
Voice dialogue
When
an alarm occurs, the system dials the phone number that
has been programmed into the system. When the call is
connected, you will hear a recorded voice message relating to the
alarm and then the system will announce: "Press 1 to turn on
alarm, press 2 to turn off alarm, press 3 to monitor, press 4 to
call".
To Next Page
Loading...