Evolveo SecuPro - Page 96

96
Duration
Used to set the recording
duration (unit: second, 1
-20
available)
20 seconds
Timer
Activation timer
It is used to set the time of
day for automatic switching
on and to switch on/off the
automation.
Deactivation timer
It is used to set the time of
day for automatic alarm
shutdown and to switch
on/off the automation.
Deactivation timer
Reserved
+08:00
Date and time
Time and date settings
Synchronisation via
Wi
-Fi
Enable/disable time
synchronisation over WiFi
networks
Enable
2G/4G synchronisation
Enable/disable time
synchronisation using the
mobile network
Enable
View Full Version
Used to display the
firmware and MAC
address of the WiFi
module, firmware and
IMEI of the GSM
module
and the serial number of
the panel
DESCRIPTION
1. Beep when activated: If enabled, the system will report the
system status when activated or deactivated.