Hardware description
Chapter 2.
2.2 Markings
The identification label of the eWON is placed at the left hand side of the housing.
The different parts of the label are shown below:
Device type and interfaces
Serial number 1145 = year+week
0062 = sequential number
39 = suffix COSY RS232/422/485
40 = suffix COSY MPI
Power supply requirements. See
External power supply characteristics
Commercial part number
MAC address
Hardware features:
BAT = battery for RTC
Firmware language set ID
MA (English, German, French)
2.3 Applicable directives, standards and compliance
Aspect Standard N° Title
EMC
CE-mark
1
2014/30/EU Electromagnetic Compatibility
Directive
RE directive 2014/53/EU
Safety
cCSAus mark
Certificate N° 227905
2
IEC/EN60950
CAN/CSA C22.2 NO. 60950-1-07
ANSI/UL UL 60950-1
Information Technology Equipment -
Safety - Requirements
Emissions EN55022 Information Technology Equipment -
Radio Disturbance Characteristics -
Limits and Methods of Measurement
Immunity EN55024 Information Technology Equipment-
Immunity Characteristics- Limits and
Methods of Measurement
Environment
(vibration & climatic)
IEC 60068-
2-1
2-2
2-14
2-29
2-30
2-64
Environmental testing
Cold
Dry heat
Change of temperature
Bump
Damp heat (cyclic)
Vibrations
Environment
(Ingress Protection)
IP30
IEC 60529 Degrees of Protection Provided by
Enclosures
1 To check our CE Declaration of Conformity click here
2 To check our cCSAus Certificate of Compliance click the link here
eWON COSY 141 - Installation Guide (How to) Page 4/20