Need help?Do you have a question about the Exalto wiper control CT3N and is the answer not in the manual?
General| Housing | Plastic |
|---|---|
| Water spray function | Yes |
| Intermittent wipe function | Yes |
| Operating temperature | -40°C to +85°C |
| Protection level | IP65 |
| Supply voltage | 12V DC |
| Output | Relay |
| Current | 5 A per output |
Describes the CT3N as an electronic wiper control system for multiple motors connected via CAT5 cable.
Lists the components included in the standard supply for the Exalto wiper control system.
Details the purpose and operation of each button on the wiper control panel.
Specifies that the wiper control operates on 12V or 24V DC power supply.
Details technical data including voltage, fuses, currents, inputs, outputs, and connections.
States conformity with EMC and RoHS directives, and relevant maritime standards.
Provides the dimensions for the control panel and relay box for installation planning.
Explains the procedure for mounting the control panel and connecting it to the relay box.
Describes the connection of the control panel to the relay box using a CAT5 cable.
Details the color coding for wires connecting wiper motors to the control box.
Illustrates wiring connections for motors, pump, and control box terminals.
Details how to adjust wiper speed and select intermittent modes using buttons 7, 8, and 9.
Covers wash/wipe program, single wipe, and optional heating function activation.
Covers backlight customization and correct procedures for powering the system.
Details system reset steps and diagnosis of motor faults.
Describes communication error indications and potential causes like cable issues.
Lists the available wiper control system models based on the number of wipers supported.
To Next Page