Exalto wiper control CT3N User Manual

- Exalto Wiper Technologies type CT3N
14
6.3 Communication error
A shifting eect of the mode bar led indicates that control panel can’t communicate
with the relay box; this may happen if the at cable is damaged or improperly con-
nected or if there is a problem with the CAN Bus terminations.
7. Available models
As standard the systems are supplied for 2 to 5 wiper motor operation. We can also
oer the system for larger numbers of wipers with grouped operation. These systems
are project specic and can be congured to your operational requirement.
Wiper control system
(control panel + relay box + cable)
Control panel Relay box Cable No. of wipers
210321224 210321224.P 210321224.R
CAVOT8EX05
2
210331224 210331224.P 210331224.R 3
210341224 210341224.P 210341224.R 4
210351224 210351224.P 210351224.R 5
If the operator requires two stations, this can be completed by adding an extra
panel via a CAN BUS to the relay box.

Exalto wiper control CT3N Specifications

General

Brand	Exalto
Model	wiper control CT3N
Category	Controller
Language	English