Exalto wiper control CT3N User Manual

- Exalto Wiper Technologies type CT3N
6
Supplementary information:
• The European directive 2014/35/EU (Low Voltage) is not applicable to this prod-
uct as this device is powered by voltage values below 50Vac or 75Vdc.
• The cabling systems that will be installed on the product, should be conform
their own safety requirements. The system complied with the requirements of
IMO A.813 Decision about protection against interference on maritime radio
communications.
Model No. of wipers Control panel Relay box Art. code
CT3N2 2 210321224.P 210321224.R 210321224
CT3N3 3 210331224.P 210331224.R 210331224
CT3N4 4 210341224.P 210341224.R 210341224
CT3N5 5 210351224.P 210351224.R 210351224
If user need two stations, wire up the adding panel (optional) via CAN BUS to the
relay box.
2. Installation
2.1 Dimensions

Exalto wiper control CT3N Specifications

General

Brand	Exalto
Model	wiper control CT3N
Category	Controller
Language	English