Exalto wiper control CT3N - Control Panel Functions; Button Functions; Power Requirements

- Exalto Wiper Technologies type CT3N
4
1.3 Functions
1. Single wiper ON/OFF button
2. General ON/OFF button
3. Backlighting color and brightness button
4. Heaters button (additional relay box required)
5. Wash /Wipe button
6. Single wipe buttonall wipers
7. Decrease speed
8. Increase speed
9. Selected mode led bar
1.4 Power supply
This wiper control is available to operate under a power supply of 12 or 24V DC.
Check the power supply of the unit supplied, before connecting it to the ship’s elec-
tric system.
1
2
3
4
5
6
8
7
9