Excell PWH3 - RS232 Serial Interface Settings

EXCELL PRECISION CO., LTD
02005159 ZSME300000225
26
2-3 RS232 Serial Interface Settings
 Exit the RS232 Serial Interface Setting Mode
 Baud Rate Settings
 Communication Protocol Settings
 Output Format Settings
 Transmission method setup
 The Selection of Continuous Transmission Rate
 Auto Transmission at Zero
 Reset of Auto Transmission
 Output Condition Settings
 RS232 6/7 digits setting
 RTC adjustment
 Y/M/D Print Format Selection
 RS485 ID Input (Option)
 Line Feed Input
Press TARE | PT key
Key in the parameter
00 ~ 08
Key in the parameter
“00”, then press
1 TARE | PT key to exit
ON|ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward