Excell PWH3 - Continuous Transmission Settings

EXCELL PRECISION CO., LTD
02005159 ZSME300000225
31
2-3-4 Continuous Transmission Settings
Select in the RS232 serial interface setting mode to set the
Continuous Transmission status.
Transmission setting
LCD shows the last setting
 Default setting:
Transmission setting
Use ON|ZERO or UNIT key to select the
transmission type:
= Command mode
= Continuous transmission
= Constantly auto
transmission
= Shut down RS232
_ = M+ Mode
Press TARE | PT key
Use ON|ZERO or UNIT key
to select the transmission
type
Press TARE | PT key
Key in the parameter “00”
Press TARE | PT key to exit
ON|ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward