18
Adjusting the Rear Stabilizer End Cap
or M8x45 Adjustable Leveler
Turn the rear stabilizer end cap on the rear
stabilizer or M8x45 adjustable leveler on
the main frame as needed to level the
elliptical trainer.
Adjusting the Handrail Arms Height
Turn the handrail arm height adjustment
knob in a counterclockwise direction to
release the handrail arm and then slide the
handrail arm up or down slightly to the
desired hole for the suitable position.
Lock the handrail arm in place by
tightening the handrail arm height
adjustment knob in a clockwise direction.
MAINTENANCE
Cleaning
The elliptical trainer can be cleaned with a soft cloth and any mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical trainer
after each use. Be careful not get excessive moisture on the computer display panel as this
might cause an electrical hazard or electronics to fail.
Please keep the elliptical trainer, specially, the computer console, out of direct sunlight to
prevent screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every
week.
Storage
Store the elliptical trainer in a clean and dry environment away from children.
Rear Stabilizer End Cap
M8x45
Adjustable Leveler
Handrail Arm Height
Adjustment Knob
To Next Page
Loading...
