16
OPERATING THE COMPUTER
SPECIFICATIONS:
TIME---------------------------------------------------- 00:00-99:59 MIN: SEC
SPEED------------------------------------------------- 0.0-99.9 MPH
DISTANCE-------------------------------------------- 0.00-99.99 MILE
CALORIES-------------------------------------------- 0-9999 CAL
FUNCTIONS AND OPERATIONS:
AUTO ON /OFF: When you start to exercise or press the MODE button on the computer, the
computer will turn on. If you do not use the equipment for 4 minutes, the power will shut off
automatically.
SCAN: Press the MODE button until the arrow points to SCAN, the computer will
automatically scan through the functions every 6 seconds.
TIME: Press the MODE button until the arrow points to TIME, the computer will display your
elapsed workout time in minutes and seconds.
SPEED: Press the MODE button until the arrow points to SPEED, the computer will display
the current training speed.
DISTANCE: Press the MODE button until the arrow points to DISTANCE, the computer will
display the cumulative distance traveled during workout.
CALORIES: Press the MODE button until the arrow points to CALORIES, the computer will
display the total calories burned during workout.
(This data is a rough guide for comparison of different exercise sessions and should not be
used in medical treatment).
RESET: Press and hold the MODE button for 4 seconds, all data values will clear to zero.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove batteries and wait 15
seconds before reinstalling.
To Next Page
Loading...
