EXFO EPM-50 - Page 68

Caractéristiques techniques 30
ELS-50
SPECIFICATIONS
a
MODEL
23BL
235BL
12C
Central wavelength (nm)
b
1310 ± 20
1550 ± 20
1310 ± 20
1490 ± 10
1550 ± 20
850 ± 25
1300 +50/–10
Spectral width (nm)
b, c
)
5
)
5
*
40/120
Output power (dBm)
*
–5
*
–5
*
–24/–21
(50/125 μm)
Power stability (dB)
b, d
±0.10
±0.10
±0.10
Battery life (hours)
b
60
60
60
Tone generation (Hz)
270, 1 k, 2 k
270, 1 k, 2 k
270, 1 k, 2 k
Warranty (year)
1
1
1
STANDARD ACCESSORIES
Soft pouch, LSA-89 FC connector adapter, quick reference sticker in five languages,
Certificate of Compliance, three AA batteries
GENERAL SPECIFICATIONS
Size (H x W x D)
189 mm x 78 mm x 37 mm (7
7
/
16
in x 3
1
/
16
in x 1
7
/
16
in)
Weight
0.4 kg (0.9 lb)
Temperature operating
storage
—10 °C to 50 °C (14 °F to 122 °F)
—40 °C to 70 °C (–40 °F to 158 °F)
Relative humidity
0 % to 95 % non-condensing
OPTIONAL ACCESSORIES
LSA-89 (FC connector adapter for ELS-50 Light Source)
LSA-90 (ST connector adapter for ELS-50 Light Source)
LSA-91 (SC connector adapter for ELS-50 Light Source)
Manual (User guide)
Notes
a. All specifications valid at 23 °C ± 3 °C, with an FC/UPC connector
b. Typical
c. rms for lasers and —3 dB width for LEDs
d. After 15 minutes warmup; expressed as ± half the difference between the maximum and minimum values measured
over 8 hours