EPM-50/ELS-50 3
Power Sources
The units operate with 3 AA alkaline or rechargeable batteries.
Typical Applications
The units offer specific typical applications.
EPM-50 Power Meter:
³ High power model for CATV and Telco applications
³ Enterprise/LAN for singlemode and multimode measurements
ELS-50 Light Source:
³ Telco/CATV and FTTH models; dual and triple wavelenghts
³ Enterprise/LAN models; singlemode and multimode
Conventions
Before using the product described in this manual, you should understand the
following conventions:
IMPORTANT
If the battery level becomes too low, the unit turns itself off.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury. Do not proceed unless you
understand and meet the required conditions.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. Do not proceed unless you
understand and meet the required conditions.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
may result in component damage. Do not proceed unless you
understand and meet the required conditions.
IMPORTANT
Refers to information about this product you should not overlook.