Need help?Do you have a question about the EXFO FPM-600 and is the answer not in the manual?
General| Wavelength Range | 800 nm to 1700 nm |
|---|---|
| Measurement Range | -70 dBm to +10 dBm |
| Accuracy | ± 0.15 dB |
| Display | LCD |
| Display Resolution | 0.01 dB |
| Power Measurement Accuracy | ± 0.15 dB |
| Power Resolution | 0.01 dB |
| Weight | 300 g |
| Type | Optical Power Meter |
| Optical Connector | FC, SC, ST |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -40 °C to +70 °C |
Laser safety precautions for the FLS-600 model without VFL.
Laser safety precautions for units equipped with VFL.
Electrical safety guidelines for using the unit and accessories.
Procedures for cleaning and connecting optical fiber cables.
Procedure to eliminate circuit and detector offsets for accurate readings.
How to apply a correction factor to measured power values.
Steps to set a reference value for accurate loss measurements.
Detailed steps for performing power and loss measurements.
Instructions for charging and replacing the unit's Li-Ion battery.
Information on viewing calibration dates and scheduling recalibration.
Common issues encountered with the unit and their solutions.
Explains error codes displayed by the unit and provides solutions.
To Next Page
