Power Meter/Light Source 1
1
Introducing the
FPM-600/FLS-600
This user guide covers the following products (unless otherwise specified,
descriptions apply to all):
FPM-600 Power Meter
FLS-600 Light Source
Main Features
Ge or GeX detector with 44 and 45 calibrated
wavelengths respectively
Absolute power and link loss measurements
Editable list of favorite power meter wavelengths
Editable list of favorite source wavelengths
Automatic wavelength detection
No offset nulling of detectors required in normal
operation
Multiple source configurations on a single port [FOT-
600] or on one or two ports [FLS-600]
Optional visual fault locator
Transmission of editable power value with source’s
signal for automatic reference with compatible power
meter
Transmission of wavelength to compatible power
meter in automatic wavelength or auto-switching
mode