What to do if my EXFO PX1-S unit does not start?
If your EXFO Measuring Instruments unit doesn't start, it might be because the battery is completely discharged. If the battery level allows, the unit’s LED will blink quickly to indicate the low battery status. Connect the unit to an external power source to recharge the battery. If the battery is no longer charging properly, you may need to replace it.
Why is my EXFO PX1-S battery not recharging?
Your EXFO Measuring Instruments battery may not be recharging because the ambient temperature is too high or too low. Ensure the temperature is within the specified range for recharging. Another cause could be that the USB power adapter is not connected properly. Make sure the USB power adapter is correctly connected to both the unit and the AC outlet. If the problem continues after verifying the connection, the USB power adapter may be defective. Try replacing it; you can purchase new USB power adapters from EXFO.
What to do if my EXFO PX1-S unit is not responding?
If your EXFO Measuring Instruments unit is not responding, it indicates that the system has encountered a problem. Try restarting the unit to resolve this issue.
How to fix inaccurate battery gauge after replacing the battery on EXFO PX1-S?
If the battery gauge is not accurate on-screen after replacing the battery in your EXFO Measuring Instruments unit, it's likely that the recharge cycle needs to be reset for the new battery. Perform a full charge of the unit to resolve this.
General| Brand | EXFO |
|---|---|
| Model | PX1-S |
| Category | Measuring Instruments |
| Language | English |
Details the primary capabilities and functionalities of the PX1 Optical Power Expert.
Presents the various models and configurations available for the PX1 Optical Power Expert.
Explains the approved methods for powering and charging the PX1 Optical Power Expert unit.
Provides essential safety warnings and precautions for operating the PX1 Optical Power Expert.
Outlines critical safety guidelines related to electrical hazards and equipment operation.
Explains the user interface and key elements of the PX1's main display screen for navigation.
Guides users on selecting and changing the operational wavelengths for testing.
Provides step-by-step instructions for performing optical power and link loss measurements.
Instructs users on how to access and review stored measurement data directly from the unit.
Explains the procedure for freeing up storage space by deleting measurement results.
Details the recommended methods for cleaning detector ports to ensure measurement accuracy.
Covers the process and important considerations for recharging the PX1's battery.
Explains the purpose, process, and recommended frequency for unit recalibration.
Lists common issues encountered with the PX1 and provides potential solutions.
Offers contact details and guidance for obtaining technical assistance for the product.
Outlines the terms and conditions of the EXFO product warranty.
Details the procedures for sending the unit for service or repair under warranty.
To Next Page
