Need help?Do you have a question about the EXFO Optical Xplorer OX1 and is the answer not in the manual?
General| Brand | EXFO |
|---|---|
| Model | Optical Xplorer OX1 |
| Category | Measuring Instruments |
| Language | English |
Key capabilities and functions of the OX1 Optical Xplorer device.
Explains the meaning of LED indicators for status and battery information.
Presents the various test functions and tools available on the Optical Xplorer.
Provides essential safety precautions and warnings for using the Optical Xplorer.
Details critical safety guidelines related to the unit's laser source.
Covers important safety measures regarding electrical components and power supply.
Guides through initial setup, including language and regional settings.
Guidance on using launch and receive test cords for accurate fiber testing.
Configuring custom criteria for pass/fail status and EXFO Advisor quality ratings.
Steps to reset the unit to its original factory default configuration.
Detailed steps and parameters for conducting fiber optic tests.
Defining minimum and maximum power or loss values for testing.
Calibrating the power checker by setting reference power levels.
Step-by-step guide to perform absolute power or link loss measurements.
Steps and important notes for charging the unit's internal battery.
Detailed procedure for safely replacing the unit's main battery.
Instructions for checking and installing software and firmware updates.
A table listing common issues, their possible causes, and solutions.
Procedure to reset the unit to its initial state if major problems occur.
Contact information and procedures for obtaining technical support from EXFO.
Procedure for sending the unit for service, repair, or calibration.
To Next Page
