What to do if the source power is too low in EXFO FTB-5800?
If the source power is too low, you should: * Check if the fiber link is damaged. * Use the intensity meter to check the source signal. * Check your connections. * Make sure your fiber link is not too long.
What to do if the source power is low in EXFO FTB-5800?
If the source power is low, you should: * Check if you have the right input port. * Check if the fiber link is damaged. * Check for irregularities in the fiber. * Use the intensity meter to check the source’s signal. * Make sure your fiber link is not too long.
What to do if source power is too high in EXFO Measuring Instruments?
If the source power is too high, you should: * Check if you have the right input port. * Check if there is an amplifier in your fiber link. * Use the intensity meter to check the source’s signal. * Add an attenuator to the link.
What to do if there is a critical module error in EXFO FTB-5800?
If there is a critical module error, try restarting the application. If the problem persists, contact EXFO.
What to do if module temperature is very high in EXFO FTB-5800?
If the module temperature is very high, use the system within the recommended operation temperature.
What to do if module temperature is too high for operation in EXFO FTB-5800 Measuring Instruments?
If the module temperature is too high for operation, use the system within the recommended operation temperature.
What to do if module temperature is very low in EXFO FTB-5800?
If the module temperature is very low, use the system within the recommended operation temperature.
What to do if module temperature is too low for operation in EXFO FTB-5800 Measuring Instruments?
If the module temperature is too low for operation, use the system within the recommended operation temperature.
General| Category | Measuring Instruments |
|---|---|
| Model | FTB-5800 |
| Manufacturer | EXFO |
| Platform Type | Modular |
| Type | Optical Spectrum Analyzer |
| Sweep Speed | Up to 200 nm/s |
| Dynamic Range | ≥ 70 dB |
| Input Power Range | Up to +20 dBm |
| Display | 10.4-inch touchscreen LCD |
| Interfaces | USB, Ethernet |
| Power Supply | AC and Battery |
| Operating Temperature | -10 to 50 °C |
| Storage Temperature | -20°C to 70°C |
To Next Page
