Introducing the OX1 Optical Xplorer
Optical Xplorer 7
Power Sources
Note: If you have a vehicle equipped with dedicated USB charging ports, you
could connect your unit to one of these ports to charge the battery. The
actual results will vary with each vehicle. You could also use a certified USB
power bank (portable charger) to charge your unit.
Indoor and outdoor use:
One lithium-ion (Li-ion) or one lithium-polymer (Li-Po)
rechargeable battery (main battery that automatically takes over if
you disconnect the unit from its external power source).
Possible to switch from an external power source to battery power
or vice versa without affecting operation.
Rechargeable battery for real-time clock. This battery can keep the
date and time for weeks even if the unit is not connected to AC
power and the lithium-ion battery or the lithium-polymer (main
battery) is depleted.
Note: Both the main battery and the clock battery recharge automatically when
the unit is connected to an external power source. However, the clock
battery will only charge when the unit is on or in sleep mode.
Note: You can replace the main battery yourself (see Replacing the Battery on
page 118), but not the clock battery.
Note: When the ambient temperature is below 0 °C (32 °F) or when it reaches or
exceeds about 40 °C (104°F), the main battery can either charge more
slowly than usual, or not charge at all, depending on the internal
temperature of your unit.
For more information, see Electrical Safety Information on page 16.
To Next Page
Loading...
Need help?
General
