Setting up Your Unit
44 OX1
Adjusting the Date, Time and Time Zone
Adjusting the Date, Time and Time Zone
The time is displayed in the title bar. When saving results, the unit also
saves the corresponding date and time.
By default, the time is expressed in a 24-hour format, but you can select a
12-hour format (AM/PM) if you prefer.
Note: You cannot modify the format in which the date is displayed.
You can set the date and time manually or let the unit synchronize them
automatically with the TestFlow mobile application (not available when
unit is used without a smart device).
If you use your unit in conjunction with a smart device, each time a
connection is established between the two, by default, the date, time and
time zone of the unit are synchronized with those of the smart device. You
can disable the automatic synchronization if you prefer.
To modify the date format:
1. From the main menu, tap Settings.
To Next Page
Loading...
