Maintenance
Optical Xplorer 153
Working With a Wireless Network
Configuring a Wireless Network
Before being able to connect your unit to a Wi-Fi network, you must first
configure the desired networks with the TestFlow mobile application.
Once the configuration and first connection are successful, the configured
network is automatically added to the list of possible networks on your
unit.
The list of configured networks as well as the last network used are kept in
memory for future use even when you turn your unit off.
To configure a wireless network:
1. Ensure that a Bluetooth
®
connection has already been established
between your unit and a smart device (see Establishing or Closing a
Connection With a Smart Device Via the Bluetooth Technology on
page 140).
2. If necessary, enable the Wi-Fi communication on your unit
(see Enabling or Disabling the Wireless Communication on page 146).
3. On the smart device, open the TestFlow application and access its
main menu ( menu).
IMPORTANT
You must first establish a Bluetooth connection between your unit
and a smart device before attempting to configure a Wi-Fi network.
To Next Page
Loading...
Need help?
General
