Troubleshooting
172 OX1
Restoring Your Unit to Normal Operation
To restore you unit to normal operation:
1. Ensure that the battery level of your unit will be sufficient to start the
unit when instructed to do so (no red battery icon on screen or red,
steady LED on the unit’s front panel).
2. Turn off your unit (shutdown).
3. If applicable, disconnect the USB cable. This is necessary to be able to
open the unit as explained hereafter.
4. Position the unit so that its front panel rests on a flat surface such as a
table.
5. On the back of the unit, using a 2.5 mm hex socket screwdriver, turn
the screws (4) counterclockwise until they are loose.
Note: You can remove the screws completely if you want, but you can also leave
them in their holes, as long as the back cover can be moved.
To Next Page
Loading...
