Getting Started with Your Unit
24 OX1
Configuring Your Unit at First Startup
Configuring Your Unit at First Startup
The first time you turn on the unit, a wizard is displayed, enabling you to set
the operation language, read and accept the EXFO license agreement,
configure the date and time, and select the desired distance units.
Note: You can change the regional parameters later if necessary.
Once the configuration is complete, you are presented with an overview of
the main features of your unit. This getting started guide will be available at
all times from your unit for future reference (see Accessing the Online
Documentation on page 178).
If you wish to retrieve the firmware and software updates for your unit, you
will need to configure a wireless network. To do so, you must install the
TestFlow mobile application on a smart device. You will need a Google
account (Android-based devices) or an Apple ID (iOS-based devices) to
install the TestFlow mobile application to your smart device.
To Next Page
Loading...
