Maintenance
Optical Xplorer 157
Working With a Wireless Network
Connecting to a Wireless Network From Your Unit
When you start a new work session with you unit, it will automatically
connect to the last network used, unless this network is not available or its
password has changed in the meantime (reconfiguration necessary).
Should a network failure occur while the unit is connected to it, the unit
will try to reconnect to this network automatically as soon as it becomes
available again.
To connect to a wireless network from your unit:
1. Ensure that a connection has already been established between your
unit and a smart device via the Bluetooth
®
technology (see Working
With a Wireless Network on page 150).
2. From the main menu, tap Settings.
To Next Page
Loading...
