EXFO Optical Xplorer OX1 User Manual

Maintenance
150 OX1
Working With a Wireless Network
Working With a Wireless Network
Note: You need a smart device equipped with the TestFlow mobile application to
configure a wireless network to which your unit will be able to connect
later.
By connecting your unit to a wireless network, you can check for updates,
download these updates and install them directly on your unit
(see Upgrading Applications and Firmware on page 163).
By default, the Wi-Fi connection is disabled, both on the OX1 and in the
Optical Xplorer tool of the TestFlow mobile application. You must enable it
before trying to connect to a wireless network (see Enabling or Disabling
the Wireless Communication on page 146).
Before being able to connect your unit to a Wi-Fi network, you must first
configure the desired networks with the TestFlow mobile application.
The list of configured networks as well as the last network used are kept in
memory even when you turn your unit off.
You can remove configured networks from the list to prevent automatic
connections to these networks.

EXFO Optical Xplorer OX1 Specifications

General

Brand	EXFO
Model	Optical Xplorer OX1
Category	Measuring Instruments
Language	English