Setting up Your Unit
Optical Xplorer 49
Selecting the Distance Units
Selecting the Distance Units
You can select the measurement units that your unit will use to display
distance and length values.
By default, the unit uses metric distance units (meters and kilometers), but
you can change for imperial units (feet and kilofeet) if you prefer.
Note: Values of less than 1 kilometer or 1 kilofeet will be expressed, respectively,
in meters or feet for more precision.
The value that you set is kept in memory even when you turn the unit off.
To select the distance units:
1. From the main menu, tap Settings.
To Next Page
Loading...
