Exor ePALM10 - User Manual

Tech-note
tn202-2.doc - 10.01.2012
ePALM10 Product Manual
1
ePALM10 Product Manual
The ePALM10 is a state-of-the-art handheld HMI device with a graphic display and a keypad. The
rugged polyamide enclosure offers a high level of shock and environmental resistance making the
ePALM the ideal choice for use in the factory floor.
Contents
1 Highlights .......................................................................................................................... 3
2 Technical data ................................................................................................................... 4
3 Operation .......................................................................................................................... 6
3.1 Enabling Switches ................................................................................................ 6
3.2 Indicators and Keypad ......................................................................................... 6
3.3 Battery Replacement............................................................................................ 7
3.4 Power Supply and Grounding .............................................................................. 8
3.5 Applicable Regulations ........................................................................................ 9
3.6 Installation Environment ....................................................................................... 9
3.7 Cleaning Faceplates .......................................................................................... 10
3.8 Getting Started ................................................................................................... 10
3.8.1 Serial Communication ........................................................................................ 10
3.8.2 Ethernet Communication ................................................................................... 10
3.9 Troubleshooting ................................................................................................. 10
4 Connections .................................................................................................................... 11
4.1 Serial Communication - Types –0061 and –0062 .............................................. 11
4.1.1 Using Optional Fieldbus Modules ...................................................................... 14
4.1.2 Connecting the ePALM to the Simatic S7 MPI network ..................................... 15
4.2 Ethernet Communication - Type –0066 and –0068 ........................................... 16
4.3 Profibus DP Communication - Type –0067 and –0069 ..................................... 19
4.3.1 Termination switch ............................................................................................. 21
4.3.2 Programming connector ..................................................................................... 22
5 Accessories ..................................................................................................................... 23

Exor ePALM10 Specifications

General

Resolution	1280 x 800 pixels
Power Supply	24 VDC
Enclosure	Aluminum
Display	10.1" TFT LCD
Operating Temperature	0°C to 50°C
Protection Class	IP65 (front)
Touchscreen	Projected Capacitive
Ingress Protection	IP65

Summary

Highlights

Technical Data

Operation

Enabling Switches

Details the two types of enabling switches and their operational states for safety.

Indicators and Keypad

Describes the standard keypad layout and LED indicators for user interaction.

Battery Replacement

Details the procedure for replacing the device's internal backup battery.

Power Supply and Grounding

Explains grounding requirements and recommended wiring for the device's power supply.

Applicable Regulations

Lists European safety regulations relevant to control systems and operator interfaces.

Installation Environment

Provides guidelines on environmental conditions for proper device installation and operation.

Cleaning Faceplates

Describes the recommended method and materials for cleaning the device's faceplates.

Getting Started

Guides users through initial setup, including software connection and programming.

Serial Communication

Details serial communication parameters required for programming via Designer software.

Ethernet Communication

Explains Ethernet connection setup and software compatibility for programming.

Troubleshooting

Provides steps to switch the handheld device to Configuration Mode for troubleshooting.

Connections

Serial Communication - Types -0061 and -0062

Details serial communication ports and signal groups for specific ePALM models.

Using Optional Fieldbus Modules

Lists supported TCM modules for connecting ePALM to fieldbus systems.

Connecting the ePALM to the Simatic S7 MPI network

Explains how to connect the ePALM to a Simatic S7 MPI network, including wiring.

Ethernet Communication - Type -0066 and -0068

Details Ethernet communication for specific ePALM models, including cable and port information.

Profibus DP Communication - Type -0067 and -0069

Describes Profibus DP connection for specific ePALM models, including cable and interface board.

Termination switch

Explains the termination switch function for Profibus DP network connection.

Programming connector

Details the programming connector on the ePALM back and its pin-out for RS-232 connection.

Accessories