Expobar CARAT 2GR - PROGRAMMING; Button functions

CARAT
25
Electronic control panel
Button functions
Water Button
Steam Button
1 Short Espresso
1 Long Espresso
2 Short Espresso
2 Long Espresso
Continuous
Depending on how long this button is pressed it has 3 functions:
Less than 1 second, activates the hot water for infusions dosing.
Between 1 and 8 seconds, activates continuous espresso dispensing, in
order to stop the dispensing, press the button again.
Over 8 seconds, activates the programming menu. This is explained later
in programming part.
Display
Shows temperature and water lever of the boiler.
Option to show time and date.
Publicity
EXPOBAR
Max
hh:mm
day
o
C
Min
PROGRAMMING
The following functions can be programmed and controlled from the digital display:
Volume control of four different espresso drinks per brewing group.
Timed hot water dispensing.
Automatic boiler filling and level control.
Automatic heating element shut-down in event of a low water condition.
System supervision through messages, warning, and alarms.
Automatic cleaning of the brewing groups.
The digital controller is programmed with four standard drink functions (these can be reprogrammed
as desired by the user) and one continuous function from the manufacturer.
The upper four buttons (1 Short Espresso, 1 Long Espresso, 2 Short Espressos, 2 Long Espressos) will
brew the programmed beverage volume and then stop automatically.
The fifth/bottom button (Continuous) brews continuously until the user stops it by pressing the
button again.