Expobar CARAT 2GR - Adjusting the Display Date and Time; Display Explanations

CARAT
27
PROGRAMMING
Display explanations
Publicity
EXPOBAR
Customizable lines
Boiler water level
Actual temperature of the main boiler
Max
hh:mm
day
Time & day
o
C
Min
T.1 T.2
96ºc 93ºc
Max
hh:mm
day
o
C
Min
Actual temperature of group boilers
(Only on multi-boiler models)
During espresso brewing this will show
the dispensing time or the volume of
the drink depending on what setting
you have.
This wave symbol
is shown when the
boiler is heating.
Accessing the Date and Time Program:
1. Press the Continuous button for 8 seconds. All buttons on the
keypad will light up and Continuous button will flash. The machine is now in
the “Doses” Program (See fig. A).
2. Press the Continuous button again for 8 seconds and the “Clock
Adjust” Program will appear (See fig. B).
Setting the Date and Time:
3. From within the “Clock Adjust” Program press the 2 Short Espresso button
once, the “HH” hour indicator will begin to flash. (See fig. C)
4. Adjust the Hour up or down using the 1 Short Espresso and 1 Long
Espresso buttons until the desired hour is showing. Then press the
2 Short Espresso button to move on and adjust the Minute (MM)
and date (Day) in the same manner.
Doses Programming
Select 30s
Clock Adjust
HH:MM Day
fig.A
fig.B
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
Adjusting the display date and time
Clock Adjust
HH:MM Day
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
fig.C
The digital display provides information, warnings, and controls for:
Boiler’s water volume and temperature.
Coffee brewing and beverage dosing time adjustment.
Low water, temperature sensor, and filter service alarms and warnings .