Expobar CARAT 2GR - Counters; Counters Access

CARAT
30
PROGRAMMING
Counters
Counters access
This machine has 4 self-operating counters that keep track of the following information:
Total litres of water that have cycled through the machine: Helpful in determining when cleaning and
decalcifying is required.
Service: Indicates when the machine needs technical service.
Total coffee and hot water servings brewed.
Coffees brewed for each button: Helpful in calculating approximate cost of various coffee and
beverage capsules used.
Clock Adjust
Counters
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
1 short espresso ↑ +
1 long espresso ↓ -
2 short espresso OK
Continuous to conrm
Accessing the Counters:
1. From within the “Clock Adjust” Program (see page 24) press the Continuous
button to access the “Counters” (See fig.A).
2. Press the Continuous button again to scroll through the “Counters”.
3. To exit the “Counters” press the Continuous button until the
display returns to the date, time, and boiler information.
Resetting the Counters:
1. From within the “Counters” function press the 1 Short Espresso
and 2 Short Espressos buttons simultaneously. This will reset all
counters to zero.
fig. A
fig. B