LCD DISPLAYED MESSAGES
39
10.8 Line Voltage Overload
This failure condition will interrupt the delay cycle. The delay time will not be
completed because the line over-voltage failure is a failure that requires an
immediate shutdown.
If the line voltage of the DUT input exceeds the maximum limit of DUT voltage,
the unit will indicate failure by illuminating the FAIL indicator and activating the
alarm. All relays will be deactivated to disable voltage to the DUT. The display
will indicate a line over-voltage failure as follows:
Line OV D >300V
M1-1
_
G-L
2500µ A
To Next Page
Loading...