Extech Instruments 382100 User Manual

22 382100-en-US_V2.8 02/22
4.5.10 Set Clamp type to 200 A or 1200 A
1. Press SHIFT once and the symbol " SHIFT1 " will switch off; press ▲ or ▼ to select the
clamp type. (Default is 1200A)
2. Press SHIFT again to show symbol “SHIFT1” and then press ▼ to enter the next function
(Clamp type → RS232 Output Select)
Figure 4-5-10a: Clamp Type (Screen 1)
Figure 4-5-10b: Clamp Type (Screen 2)

Extech Instruments 382100 Specifications

General

Brand	Extech Instruments
Model	382100
Category	Multimeter
Language	English