Example: Basic Stack with Four Switches
This example shows a stack of four switches in a single rack.
The slot numbers presume a console connection to the switch at the top of the physical
stack.
Figure 9 shows cable connections for a 4-node stack using SummitStack 40G cables to
connect switches with integrated SummitStack ports.
Figure 9: SummitStack Cable Connections Using Four Switches with Integrated
SummitStack Ports
Table 7 lists the recommended order for connecting the stacking ports in this example.
Table 7: Basic Stack with Four Switches: Connections
Connect this slot and port . . . . . . To this slot and port
Slot 1 Stack Port 2 Slot 2 Stack Port 1
Slot 2 Stack Port 2 Slot 3 Stack Port 1
Slot 3 Stack Port 2 Slot 4 Stack Port 1
Slot 4 Stack Port 2 Slot 1 Stack Port 1
Example: Basic Stack with Eight Switches
Figure 10 shows cable connections for an 8-node stack using SummitStack 40G cables
to connect switches with integrated SummitStack ports.
Connect the Switches to Form the Stack Ring Build Stacks
34 Extreme 7720 Hardware Installation Guide
To Next Page
Loading...
