Extreme Networks AP305C Accessories Guide

8. Tighten the beam clip top screw to a torque of 50 in-lbs.
Figure 10: Beam clip top screw
Callout Description
1 Beam clip top screw that is used to attach the beam accessory
to a beam
Lock the Access Point after Installation
Learn how to lock the indoor access point using a Kensington® lock.
If you are using an indoor access point, you can secure it by using the Kensington® lock on the side of
the access point. The security feature is used to prevent the access point from being removed from the
mounting accessory.
Indoor Mounting Accessory Installation
Lock the Access Point after Installation
Wi-Fi 6 (802.11ax) Access Points 27

Extreme Networks AP305C Specifications

General

Model	AP305C
Category	Wireless Access Point
Frequency Bands	2.4 GHz and 5 GHz
Antenna	Internal
Power over Ethernet (PoE)	Yes
MIMO	2x2:2
Wi-Fi Standards	802.11a/b/g/n/ac
Ethernet Ports	1 x 10/100/1000Base-T Ethernet port
Form Factor	Ceiling mount, Wall mount
PoE Support	802.3af/at
Security Features	WPA3, WPA2, WPA
Operating Temperature	0°C to 50°C (32°F to +122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity Range Operating	5% to 95% non-condensing