Name: Extreme Networks AP305C
Brand: Extreme Networks
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Figure 4: AH-ACC-BKT-AX-SL accessory circular tip

Callout Description

1 AH-ACC-BKT-AX-SL accessory circular tip

5. Press and rotate the access point clockwise until it locks into place on the accessory.

6. Plug the RJ45 connector plug into ETH or ETH0, RJ45 connector receptacle on the access point.

7. When using a AP305C/CX or AP410C access point, attach the Ethernet port cap to the access point

Ethernet port.

For more information about Ethernet cap, refer to Ethernet Cap Accessory Information on page 13.

8. Place the cable cover over the Ethernet cable.

9. Replace the ceiling tiles.

Install the Access Point on a 15/16 in. Wide Ceiling Rail Using AH-ACC-

BKT-AX-TB Accessory

Before You Begin

The following hardware is required for installing the AH-ACC-BKT-AX-TB accessory on a 15/16 in. wide

ceiling rail:

• An indoor access point

• One AH-ACC-BKT-AX-TB accessory

About This Task

The AH-ACC-BKT-AX-TB accessory is shipped with most indoor model access points, and is used for

standard drop ceiling rail installation.

Indoor Mounting Accessory Installation

Install the Access Point on a 15/16 in. Wide Ceiling Rail

Using AH-ACC-BKT-AX-TB Accessory

Wi-Fi 6 (802.11ax) Access Points 19

Other manuals for Extreme Networks AP305C

Questions and Answers:

Need help?

Do you have a question about the Extreme Networks AP305C and is the answer not in the manual?

General