Access Point Mounting Options and Accessory Usage
Mount the AP460C, AP460S6C, or AP460S12C horizontally or vertically on a pole using the built-in
brackets on the hardware, or on a solid flat surface using an accessory bracket, as described in the
following table:
Table 8: Mounting accessory usage
Mounting accessory part number Wall install Pole install Notes
AH-ACC-STRP-MRN No Yes Outdoor access point stainless
steel pole cable clamps for 3 in.
to 7 in. diameter pole (larger
poles)
AH-ACC-BKT-ASM Yes No You will need to provide four
mounting screws and screw-in
anchors
Table 9: Power cable accessory information
Part number Details
AH-ACC-PW-CBL-US 6 ft. 18 AWG universal power cord with United
States plug
AH-ACC-PW-CBL-UK 6 ft. universal power cord with United Kingdom
plug
AH-ACC-PW-CBL-EU 6 ft. universal power cord with European Union
plug
AH-ACC-PW-CBL-AU 6 ft. universal power cord with Australia plug
AH-ACC-PW-CBL-JP 6 ft. universal power cord with Japan plug
AH-ACC-PW-CBL-KR 6 ft. universal power cord with Korea plug
Related Topics
Access Point and Accessory Box Contents and Order Information on page 15
Install the Access Point on a Vertical Pole or a Horizontal Pole
Install the access point on a vertical or horizontal pole using the built-in access point bracket.
Before You Begin
The following hardware is required for installing the access point on a vertical pole or a horizontal pole:
• An access point (AP460C, or AP460S6C, or AP460S12C)
• Two AH-ACC-STRP-MRN accessory, which is an outdoor access point stainless steel hose strap for 3
in. to 7 in. diameter poles
Tip
The best practice is to mount the access point to a pole with a minimum circumference of
3 in.
Install the Access Point Access Point Mounting Options and Accessory Usage
ExtremeWireless™ AP460C, AP460S6C, and AP460S12C Access Points 17
To Next Page
Loading...
Need help?
General
