Extreme Networks ExtremeWireless AP460C User Manual

Figure 6: Wall mounting accessory M5 bolt holes
Callout Description
1 M5 bolt attachment holes
Note
If you are mounting the access point horizontally, ensure that the ports are facing down to
reduce the chance of water entering the chassis.
Procedure
1. Using the ASM wall accessory as a template, mark and drill four mounting holes on a flat surface.
Note
The printed arrows on the accessory must be pointing up.
Figure 7: ASM accessory wall mounting hole markings
2. Attach the ASM accessory to the wall by using four M5 shoulder mounting screws.
Tip
The best practice is to use screw-in anchors with the mounting screws on a wood surface,
and concrete anchors on a concrete surface.
3. Insert the M5 shoulder mounting screws into the mounting holes.
Install the Access Point
Install the Access Point on a Flat Surface
ExtremeWireless™ AP460C, AP460S6C, and AP460S12C Access Points 21

Extreme Networks ExtremeWireless AP460C Specifications

General

Brand	Extreme Networks
Model	ExtremeWireless AP460C
Category	Wireless Access Point
Language	English