13
Extreme Networks Wireless AP3825 Installation Guide
6
Installation
This chapter provides installation instructions for the Extreme Networks Wireless WS-
AP3825 access point and an optional AP power supply.
Unpacking the WS-AP3825
To unpack the access point:
1 Open the box and remove the packing material protecting the AP.
2 Verify that the carton contains the items listed in Table 2.
3 Perform a visual inspection of the AP for any signs of physical damage. Contact Extreme
Networks if there are any signs of damage. Refer to Getting Help on page 5 for details.
Accessories
The following accessories are available for the Extreme Networks Wireless WS-AP3825. For
ordering information, contact your Extreme Networks sales representative.
• 12V DC power supply (see External Power Supplies on page 27)
• External antennas (WS-AP3825e models only. See External Antennas on page 31)
For information about... Refer to page...
Unpacking the WS-AP3825 4-13
Accessories 4-13
Access Point Installation Procedures 4-14
Configuring AP Channel Settings 4-20
Table 2 WS-AP3825 Package Contents
Quantity Item
1WS-AP3825
2 Mounting brackets with screws
2 Wall mounting screws and plastic anchors
1 WS-AP3825 Quick Reference card
To Next Page
Loading...
